Find Power for Your Camera

Start with your exact camera model, then choose a power cable, adapter plate, or complete kit. The options below are matched to the camera models and electrical specifications listed on their product pages.

Choose your camera: Sony FX3 / FX30 / a7S III · Sony a7 III / a7R III / a9 · Blackmagic Pocket 4K / 6K / 6K Pro · Canon LP-E6 devices · RED Komodo

Before You Choose

• Exact model: Cameras in the same family can have different power requirements.
• Power source: Identify your battery mount, output connector, and voltage.
• Regulation: A regulated cable supplies a specified output voltage. A non-regulated cable passes the connected source voltage through.
• Mounting: Check whether the plate requires 15mm LWS rods and whether the battery, charger, and mounting parts are included.

Sony FX3, FX30 & a7S III

Already have a suitable D-Tap power source? Braided Coiled D-Tap to Sony NP-FZ100 Dummy Battery — SCFZ100 is listed for these three camera models. It accepts 12–17V input and provides regulated 8V output. Its cable extends from 16 to 36 inches.

Battery and mounting hardware are separate unless included in a selected kit. Check the product page for your exact camera and setup.

Sony a7 III, a7R III & a9

• D-Tap cable: 30-inch regulated NP-FZ100 cable — PTA73. Listed input: 11–19V; regulated output: 8V.
• Protected connector option: 28-inch SafeTap to NP-FZ100 cable — SCPTA73. Listed input: 11–19V; regulated output: 8V.
• Rod-mounted V-Mount setup: V-Mount plate to NP-FZ100 dummy battery — PDVSA3. Includes a 15mm LWS rod bracket and 20-inch camera cable. A suitable battery is required separately.

These options are also listed for Sony FX3 where specified. Use the exact model list on the selected product page.

Blackmagic Pocket Cinema Camera 4K, 6K & 6K Pro

• Already have a compatible D-Tap source? 16-inch D-Tap to dedicated 2-pin cable — DTBP4K. This cable is non-regulated; its listed input range is 11–19V. Confirm source voltage and camera requirements before connecting.
• Camera 4K or 6K with a rod-mounted battery: V-Mount plate with 15mm LWS rod bracket — VMBP4K. Its description specifically lists Pocket 4K and 6K. Confirm fit with IndiPRO for other models.
• Need battery, plate, and charger together? Micro-Series 98Wh V-Mount camera power kit — MSBM46KT. The listing includes a 98Wh battery, dedicated camera plate with 15mm LWS bracket, D-Tap charger, and AC power cord. US domestic shipping only. The listing also includes Pocket 6K G2 compatibility.

These recommendations do not establish compatibility with every Blackmagic camera. Check your exact model, including whether it is a Pocket, Cinema Camera, PYXIS, or URSA body.

Canon LP-E6-Powered Devices

28-inch SafeTap to Canon LP-E6 dummy battery — SCPTLP6 is listed for compatible LP-E6 devices, with 11–19V input and regulated 8V output.

Confirm your exact Canon model before purchase. An LP-E6-shaped battery connection does not establish compatibility with every camera or recording mode. For EOS R5 C or another model with specific power requirements, contact IndiPRO for the correct solution.

RED Komodo

Coiled D-Tap to 2-pin LEMO cable — CDTRDK is listed for RED Komodo. It extends from 12 to 36 inches and is non-regulated, with a listed 11–19V input range.

Confirm the voltage and connector wiring for your exact camera. Do not assume this listing covers KOMODO-X, V-RAPTOR, or other RED bodies.

Need Help Building a Complete Setup?

Ask IndiPRO to match your camera and power source. Include your exact camera model, battery make and model, output voltage, required connectors, mounting method, and accessories you want to power.

Shop batteries · Shop chargers · Shop power cables · Shop adapter plates