Step 3

Choose Your Power Solution

Choose Your Power Solution

From the drop down menu below select camera you are looking to power and find which solution best fits your needs.

There are 2x different solutions that can be used with our batteries

#1 Battery Adapter Plates

These plates come in both v-mount and gold mount and are used to attach your battery to power your device. Each plate features a hardwired cable regulated to your specific device's input voltage so you do not have to worry about overpowering your device. Each plate incorporates an additional d-tap output which can power other accessories via a separately sold power cable.

How to use the adapter plates

  1. Mount the plate to your camera via the 15mm rod bracket
  2. Connect the hardwired cable from the plate to your device
  3. Attach the battery and you are all set to begin

#2 D-Tap Regulation Cables

Our D-Tap regulated cables connect directly via the battery's d-tap port and to your device. Each of our d-tap cables is either regulated or unregulated depending on the device. These are good solutions if you already have a place to mount the battery on your rig.

How to use D-Tap Cables

  1. Plug the D-Tap end into the d-tap port on your battery
  2. Take either the connector or coupler and insert it into your camera
  3. Turn on your device and you're all set to begin

Your title

Newsletter

A short sentence describing what someone will receive by subscribing